EZ RJ45 Modular Plugs Datasheet

EZ RJ45 Modular Plugs

The new patented EZ-RJ45™ connector simplifies installation by allowing the pairs to be inserted through the connector. There is no difficult to handle liner or wire bar to deal with. Inspection of the correct conductor order is done before crimping so no connector is wasted because if incorrect wiring. The conductors are able to be pulled forward so the pairs are very close to the contacts. This method allows the integrity of the pairs to maintain Category Five, and even enhanced Category 5 and Category 6 capabilities. (50 u in. gold)
The EZ-RJ12™ and both EZ-RJ45™ can be crimped with most any standard tool, then trimmed with a cutter or small utility knife. However, the new BD45000 crimp tool crimps and trims the exposed conductors in one operation. The vertical action of the tool makes a uniform and positive crimp.

PartNo.		Description
300566EZ		6P6C EZ-RJ12 Plug	RJ12
300568EZ		8P8C EZ-RJ45 Category 5 Plug	RJ45
300668EZ		8P8C EZ-RJ45 Category 6 Plug *NEW*	RJ45
300668SEZ		8P8C *EZ-RJ45 Shielded* Category 6 Plug NEW**	RJ45
BD45000	-	Crimp and Trim Tool for EZ RJ12, EZ RJ45 Cat 5 & 6	----
BD45000BL	-	Replacement Blades ( 2 per Pkg ) for BD45000 Tool	----
CXB300EZ	-	Cable Boot with Strain Relief ( Required for Cat 6 )	----
CXB500EZ	-	Cable Boot *SNAGLESS* Cat 5 (color: clear) *NEW*	----
CXB600EZ	-	Cable Boot *SNAGLESS* Cat 6 (color: clear) *NEW*	----

Video Demo

BD45000 Crimp & Trim Tool

EZ-RJ45 Cat 6 Shielded with SNAGLESS Boot

CXB500/600 Snagless Boot

Back to Index

FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX973-347-2111